Good Toughness And Abrasive Resistance Tungsten Carbide Rod for
Making Dies
Detail Specification
- Material: tungsten carbide(WC+CO)
- Dimension: Dia12*330mm any size available
- Tolerance: Ground (+-0.005mm), blank(+0.3/0.5mm) based on requirement
- Grade: YG8 based on your application
- Composition: 8%Co +92% WC
- Hardness: HRA89 T.R.S.: 2320
- Type: solid round bar
- Performance: good wear resistance and toughness
- Application: making dies, other application using other suitable grade material
- Customized: accepted
Tungsten Carbide is a hard, brittle ceramic which, when combined
with 6% to 10% Cobalt, forms a tough Cermet (Ceramic-Metal). This
material was developed for use in cutting tools, having hard
ceramic crystals of a few microns in size within a ductile metal
matrix. The resulting material can withstand the high compressive
stresses imposed during cutting, as well as having good wear and
oxidation resistance at the high temperatures reached. Tungsten
Carbide has a high resistance to thermal shock, so is able to
withstand the rapid temperature fluctuations. Also, this has found
a use as electrodes for Electrode Discharge Machining
Tungsten Carbide Rod Features
- Main application is for making PCB drills, drills,endmills and
reamers, wear parts, and stamping dies, measuring tools.
- Excellent combinations of wear resistance and high toughness by
using sub-micron and ultra-fine grades.
- Anti-deformation and deflection.
- produces tungsten carbide rods with extrusion equipment and HIP sintering furnace
- 100% inspection before shipment which garantee good quality
Application Industries:
- Paper
- packaging
- printing
- Non-ferrous metal processing
- Mechanical
- Chemical,
- Petroleum
- Metallurgy
- Electronic
- Defense industries
Our common size models:
Size range(DiaXL mm) | Tolerance |
D(blank, mm) | D (ground, mm) | L(mm) |
Dia(1-5)x330 | +0.3/+0.4 | h6/h7 | 0/+2 |
Dia(6-20)x330 | +0.3/+0.6 | h6/h7 | 0/+2 |
Dia(21-40)x330 | +0.5/1.0 | h6/h7 | 0/+3 |
| We are able to help you customized various diameter and length
carbide rod |
Some grade information for Reference
| Grade | Density g/cm3 | Hardness HRA(hv) | T.R.S (M Pa) | Performances &applications recommended |
| YL10.2 | 14.5 | 92.5 | 3800 | Wear resistance and strength comparatively higher,suitable for
processing cast iron, non-ferrous metal and non-metalloid
materials. |
| YG6 | 14.9 | 89.5 | 2150 | Good Wear resistance, used for hard wood,processing original
wood,aluminum section bar,brass rod and cast iron. |
| YG8 | 14.6 | 89 | 2320 | Suitable for the roughening of cast iron and light alloys and also
for the milling of cast iron and low-alloy steel. |
| YG11 | 14.4 | 87.5 | 2260 | Medium grain, for wear parts and mining tools |
| YG15 | 14.1 | 86.5 | 2400 | Medium grain, for mining tools, cold heading and punching dies |
| YS2T | 14.45 | 92.5 | 2800 | Fine carbide,high wear resistance,high bending strength,high
resistance to bonding, high thermal strength.Machining of
refractory alloys, stainless steel and high manganese steel
etc.Mainly used for disc cutter and other tools |
| YNi8 | 14.6 | 88.5 | 1710 | This grade with 8% nickel binder, it has good wear resistance&
corrosion resistance performance ,especially used for high pressure
environmental , also good for cutting the titanium alloy. |
Our advantage of tungsten carbide rod
* Use 100% tungsten carbide raw material
* ISO 9001:2015 Certification
* with over ten year experience
* Advanced technology , automatic pressing , HIP sintering
* And precision grinding
* the tolerance of polish and ground can be +0.005/-0.005mm
* Full ability to accept OEM & ODM orders
* Stringent quality control and quality consistency.
* Strict inspection for quality of raw material and finished
products
